AT+QCAINFO

Verify CA performance and check multiple CCs for Carrier Aggregation on the modem along with frequency band and bandwidth per component carrier.

Test Command

AT+QCAINFO=?

Response

''

Execution Command

Execute the below Command to query the carrier aggregation (CA) information

AT+QCAINFO

Response

+QCAINFO: "PCC",<freq>,<bandwidth>,<band>, <pcell_state>,<PCID>,<RSRP>,<RSRQ>,<RSSI>,<SINR>
+QCAINFO: "SCC",<freq>,<bandwidth>,<band>, <scell_state>,<PCID>,<RSRP>,<RSRQ>,<RSSI>,<SINR>
+QCAINFO: "SCC",<freq>,<bandwidth>,<band>, <scell_state>,<PCID>,<RSRP>,<RSRQ>,<RSSI>,<SINR>

If no active secondary cell

''

Example:

mmcli -m 2 –command=“AT+QCAINFO”

response: ’ ’

Parameters

“-” or - indicates the parameter is invalid under the current condition.

Parameter	String	Description
<PCC>		Primary carrier component
<SCC>		Secondary carrier component.
<freq>		EARFCN
<bandwidth>	Integer type	Bandwidth. 6 -- 1.4 MHz 15 -- 3 MHz 25 -- 5 MHz 50 -- 10 MHz 75 -- 15 MHz 100 -- 20 MHz
<band>	String type	DL bandwidth. "LTE BAND 1 / 2 / 3 / ... / 66"
<pcell_state>	Integer type	Primary cell state 0 -- No serving 1 -- Registered
<scell_state>	Integer type	Secondary cell state 0 -- Deconfigured 1 -- Configuration deactivated 2 -- Configuration activated
<PCID>	Integer type	Physical Cell ID
<RSRP>	Integer type	Reference Signal Received Power
<RSRQ>	Integer type	Reference Signal Received Quality
<RSSI>	Integer type	Received Signal Strength Indication
<SINR>	Integer type	Logarithmic value of SINR. Values are in 1/5th of a dB. Range: 0–250 (-20 to +30 dB).